Quick Search:    advanced search

GSW Home   GeoRef Home   My GSW Alerts   Contact GSW   About GSW   Journals List   Help

Journal of the Geological Society

This Article Figures Only Full Text Full Text (PDF) Alert me when this article is cited Alert me if a correction is posted Citation Map Services Email this article to a friend Similar articles in this journal Alert me to new issues of the journal Download to citation manager Citing Articles Citing Articles via HighWire Citing Articles via Web of Science (2) Citing Articles via Google Scholar Google Scholar Articles by James, D.M.D. Articles by Swarbrick, R.E. Search for Related Content GeoRef GeoRef Citation

Discussion on development of polygonal fault systems: a test of hypotheses

¹ 3 Finedon Hall, Finedon NN9 5NL, UK
² Department of Earth Sciences, University of Durham, South Road, Durham DH1 3LE, UK

The first 20% of the full text of this article appears below.

D. M. D. James writes: the mechanics of formation of polygonal faults are widely acknowledged as not yet fully understood and it is welcome that Goulty & Swarbrick (2005) attempt a discriminatory test between rival hypotheses. It is however important that such a test bears some relation to physical reality.

The ‘test’ is based on the assumption that the ratio of horizontal to vertical effective stress as deduced from leak-off tests in two wells in the North Sea at depths of about 2 km yields the co-efficient of earth pressure at rest therein and hence the residual friction governing the post-nucleation development of polygonal faults, apparently globally and at any depth. It is not clear if the authors consider that the polygonal fault tiers at the well sites are currently active. Neither is it clear if they assume that the coefficient of residual friction along the fracture is a reasonable approximation to the coefficient of initial friction which governs the dip of the propagating fracture tip (and the fault surface as a whole) relative to the orientation of the vertical effective stress.

It is hardly surprising that the ratio of horizontal to vertical effective stress (k) is very high in the wells analysed; the leak-off tests are from highly overpressured horizons (ratios of pore fluid pressure to total vertical stress approximately 0.80 and 0.84) and the effect of pore fluid pressure coupling (Hillis 2003) will inevitably decrease the value of the horizontal effective stress to lesser extent than it does the vertical effective stress. It is certainly not yet demonstrated that polygonal faults require overpressures of this magnitude for their formation, by any mechanism. Leak-off tests tend to overestimate the horizontal effective stress if no correction is made for the excess mud pressure necessary to overcome . . . [Full Text of this Article]

This article has been cited by other articles:

				N. R. Goulty Geomechanics of polygonal fault systems: a review Petroleum Geoscience, November 1, 2008; 14(4): 389 - 397. [Abstract] [Full Text] [PDF]

				J. Cartwright The impact of 3D seismic data on the understanding of compaction, fluid flow and diagenesis in sedimentary basins Journal of the Geological Society, September 1, 2007; 164(5): 881 - 893. [Abstract] [Full Text] [PDF]